604d www.vishay.com vishay sprague revision: 24-apr-13 1 document number: 42040 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors 4-terminal, tubular, axial lead features ? 4-terminal construction ? very low impedance ? inductance limit 2 nh ? wide temperature range ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 quick reference data description value nominal case size ? ? d x l in mm 19.050 x 41.275 to 25.400 x 92.075 operating temperature - 55 c to + 105 c rated capacitance range, c r 47 f to 22 000 f tolerance on c r - 10 %, + 50 % rated voltage range, u r 5 wv dc to 200 wv dc termination 4-terminal life validation test ? 2000 h at 105 c ? cap < 15 % from initial measurement. ? esr < 1.5 x initial specified limit. ? dcl < initial specified limit. shelf life ? 500 h at 105 c ? cap < 10 % from initial measurement. ? esr < 1.2 x initial specified limit. ? dcl < 2.0 x initial specified limit. dc leakage current ? k is a constant: 0.5 at - 25 c, 3.0 at + 105 c i in a, c in f, v in volts ikcv = low temperature performance capacitance ratio c - 55 c /c + 25 c minimum at 120 hz rated voltage wv dc capacitance remaining 5 to 50 75 % 51 and up 80 % esr ratio esr - 55 c /esr + 25 c maximum at 120 hz rated voltage wv dc multiplier 5 to 50 12 51 and up 18 dimensions in millimeters case code bare case outer insulation with polymer coated end seals lead spacing d l d l (max.) s gj 19.050 0.787 41.275 1.575 20.625 0.787 46.812 6.350 0.381 gl 19.050 0.787 53.975 1.575 20.625 0.787 59.512 6.350 0.381 gp 19.050 0.787 66.675 1.575 20.625 0.787 72.212 6.350 0.381 gs 19.050 0.787 79.375 1.575 20.625 0.787 84.912 6.350 0.381 gt 19.050 0.787 92.075 1.575 20.625 0.787 97.612 6.350 0.381 hj 22.225 0.787 28.575 1.575 23.800 0.787 34.112 7.620 0.381 hl 22.225 0.787 66.675 1.575 23.800 0.787 72.212 7.620 0.381 hp 22.225 0.787 53.975 1.575 23.800 0.787 59.512 7.620 0.381 hs 22.225 0.787 92.075 1.575 23.800 0.787 97.612 7.620 0.381 ht 22.225 0.787 79.375 1.575 23.800 0.787 84.912 7.620 0.381 jj 25.400 0.787 41.275 1.575 26.975 0.787 46.812 10.160 0.381 jl 25.400 0.787 53.975 1.575 26.975 0.787 59.512 10.160 0.381 jp 25.400 0.787 66.675 1.575 26.975 0.787 72.212 10.160 0.381 js 25.400 0.787 79.375 1.575 26.975 0.787 84.912 10.160 0.381 jt 25.400 0.787 92.075 1.575 26.975 0.787 97.612 10.160 0.381
604d www.vishay.com vishay sprague revision: 24-apr-13 2 document number: 42040 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering example (1) electrolytic capacitor 604d series: 604d272f005gj2 note (1) for lead (pb)-free/rohs compliant products add su ffix e3 to part numbe r. example: 604d272f005gj2e3 dimensions and available forms part number information 604d 272 f 005 gj 2 type capacitance capacitance tolerance dc voltage rating case code case style identifies the series name. expressed in f. the first two digits are significant figures. the third is the number of zeros. f = - 10 %/+ 50 % (std.) expressed in volts. the letter r signifies a decimal point (i.e. 7r5 = 7.5 v). see table dimensions 1 = pvc sleeve 2 = polyester sleeve (std.) 5 = polyester sleeve with epoxy end seal (required for exposure to halogenated clea ning solvents) 7 = pvc sleeve with epoxy end seal (required for exposure to halogenated clea ning solvents) electrical data and ordering information capacitance (f) part number nominal case size d x l (mm) max. esr at 100 khz/25 c ( ? ) max. z at 100 khz/25 c ( ? ) max. ripple current at 100 khz/85 c (a) 5 wv dc at + 85 c, surge = 7 v 2700 604d272f005gj2 19.05 x 41.28 0.146 0.110 1.50 3300 604d332f005gl2 19.05 x 53.98 0.106 0.080 1.80 4700 604d472f005gp2 19.05 x 66.68 0.080 0.060 2.50 6800 604d682f005gs2 19.05 x 79.38 0.062 0.047 3.10 3900 604d392f005hj2 22.23 x 41.28 0.095 0.071 1.90 5600 604d562f005hl2 22.23 x 53.98 0.070 0.053 2.50 6800 604d682f005hp2 22.23 x 66.68 0.052 0.039 3.20 10 000 604d103f005hs2 22.23 x 79.38 0.040 0.030 4.00 8200 604d822f005jl2 25.04 x 53.98 0.049 0.037 3.50 15 000 604d153f005jp2 25.04 x 66.68 0.035 0.026 4.60 18 000 604d183f005js2 25.04 x 79.38 0.027 0.020 5.60 22 000 604d223f005jt2 25.04 x 92.08 0.022 0.017 7.00 pvc sleeve 2.50 typ. (63.5) + - + 2.50 typ. (63.5) - l d d epoxy end seal styles 1 and 2 styles 5 and 7 s pvc sleeve 2.50 typ. (63.5) lead diameter no.18 awg (0.040" [1.016 mm] dia.) + - + 2.50 typ. (63.5) - l s
604d www.vishay.com vishay sprague revision: 24-apr-13 3 document number: 42040 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 7.5 wv dc at + 85 c, surge = 10 v 2200 604d222f7r5gj2 19.05 x 41.28 0.175 0.130 1.40 3900 604d392f7r5gp2 19.05 x 66.68 0.093 0.070 2.40 5600 604d562f7r5gs2 19.05 x 79.38 0.070 0.053 3.00 3300 604d332f7r5hj2 22.23 x 41.28 0.117 0.087 1.80 4700 604d472f7r5hl2 22.23 x 53.98 0.080 0.059 2.40 6200 604d622f7r5hp2 22.23 x 66.68 0.061 0.046 3.10 8200 604d822f7r5hs2 22.23 x 79.38 0.047 0.035 3.80 5600 604d562f7r5jj2 25.04 x 41.28 0.073 0.055 2.40 6800 604d682f7r5jl2 25.04 x 53.98 0.057 0.043 3.30 12 000 604d123f7r5jp2 25.04 x 66.68 0.039 0.029 4.40 15 000 604d153f7r5js2 25.04 x 79.38 0.032 0.024 5.30 18 000 604d183f7r5jt2 25.04 x 92.08 0.025 0.019 6.60 10 wv dc at + 85 c, surge = 15 v 1800 604d182f010gj2 19.05 x 41.28 0.195 0.144 1.30 2700 604d272f010gl2 19.05 x 53.98 0.144 0.107 1.70 3300 604d332f010gp2 19.05 x 66.68 0.110 0.082 2.20 4700 604d472f010gs2 19.05 x 79.38 0.081 0.060 2.80 2700 604d272f010hj2 22.23 x 41.28 0.127 0.094 1.70 3900 604d392f010hl2 22.23 x 53.98 0.092 0.068 2.20 5600 604d562f010hp2 22.23 x 66.68 0.069 0.051 2.90 6800 604d682f010hs2 22.23 x 79.38 0.053 0.039 3.60 5600 604d562f010jl2 25.04 x 53.98 0.065 0.048 3.20 8200 604d822f010jp2 25.04 x 66.68 0.044 0.033 4.10 10 000 604d103f010js2 25.04 x 79.38 0.034 0.025 5.00 15 000 604d153f010jt2 25.04 x 92.08 0.028 0.021 6.20 16 wv dc at + 85 c, surge = 20 v 1500 604d152f016gj2 19.05 x 41.28 0.207 0.149 1.20 2200 604d222f016gl2 19.05 x 53.98 0.153 0.110 1.60 3900 604d392f016gs2 19.05 x 79.38 0.085 0.061 2.60 2200 604d223f016hj2 22.23 x 41.28 0.138 0.100 1.60 3300 604d332f016hl2 22.23 x 53.98 0.107 0.077 2.00 5600 604d562f016hs2 22.23 x 79.38 0.056 0.041 3.30 8200 604d822f016ht2 22.23 x 92.08 0.046 0.033 4.10 4700 604d472f016jl2 25.04 x 53.98 0.069 0.050 2.90 6800 604d682f016jp2 25.04 x 66.68 0.048 0.035 3.90 10 000 604d103f016js2 25.04 x 79.38 0.036 0.026 4.70 20 wv dc at + 85 c, surge = 25 v 1200 604d122f020gj2 19.05 x 41.28 0.240 0.170 1.20 2200 604d222f020gp2 19.05 x 66.68 0.132 0.092 2.00 3300 604d332f020gs2 19.05 x 79.38 0.100 0.070 2.50 1800 604d182f020hj2 22.23 x 41.28 0.160 0.110 1.50 2700 604d272f020hl2 22.23 x 53.98 0.120 0.084 1.90 3900 604d392f020hp2 22.23 x 66.68 0.085 0.060 2.60 5600 604d562f020hs2 22.23 x 79.38 0.064 0.045 3.80 4700 604d472f020jl2 25.04 x 53.98 0.078 0.055 2.70 6800 604d682f020jp2 25.04 x 66.68 0.055 0.039 3.50 8200 604d822f020js2 25.04 x 79.38 0.042 0.030 4.50 10 000 604d103f020jt2 25.04 x 92.08 0.034 0.024 5.50 electrical data and ordering information capacitance (f) part number nominal case size d x l (mm) max. esr at 100 khz/25 c ( ? ) max. z at 100 khz/25 c ( ? ) max. ripple current at 100 khz/85 c (a)
604d www.vishay.com vishay sprague revision: 24-apr-13 4 document number: 42040 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 25 wv dc at + 85 c, surge = 30 v 1000 604d102f025gj2 19.05 x 41.28 0.320 0.224 1.05 1200 604d122f025gl2 19.05 x 53.98 0.240 0.168 1.40 1800 604d182f025gp2 19.05 x 66.68 0.180 0.126 1.75 2200 604d222f025hl2 22.23 x 53.98 0.145 0.102 1.90 3300 604d332f025hp2 22.23 x 66.68 0.108 0.072 3.00 2700 604d272f025jl2 25.04 x 53.98 0.116 0.081 2.40 4700 604d472f025jp2 25.04 x 66.68 0.080 0.056 3.25 6800 604d682f025js2 25.04 x 79.38 0.062 0.043 4.00 8200 604d822f025jt2 25.04 x 92.08 0.051 0.036 4.65 30 wv dc at + 85 c, surge = 40 v 820 604d821f030gj2 19.05 x 41.28 0.380 0.262 1.00 1000 604d102f030gl2 19.05 x 53.98 0.295 0.204 1.25 1500 604d152f030gp2 19.05 x 66.68 0.204 0.141 1.70 1800 604d182f030hl2 22.23 x 53.98 0.165 0.114 1.75 2700 604d272f030hp2 22.23 x 66.68 0.120 0.083 2.35 3900 604d392f030hs2 22.23 x 79.38 0.088 0.061 2.90 2200 604d222f030jl2 25.04 x 53.98 0.133 0.092 2.25 3300 604d332f030jp2 25.04 x 66.68 0.095 0.056 3.00 4700 604d472f030js2 25.04 x 79.38 0.074 0.051 3.60 5600 604d562f030jt2 25.04 x 92.08 0.059 0.041 4.40 40 wv dc at + 85 c, surge = 50 v 680 604d681f040gj2 19.05 x 41.28 0.480 0.322 0.90 820 604d821f040gl2 19.05 x 53.98 0.380 0.255 1.15 1000 604d102f040hj2 22.23 x 41.28 0.295 0.197 1.20 1500 604d152f040hl2 22.23 x 53.98 0.220 0.147 1.55 2200 604d222f040hp2 22.23 x 66.68 0.155 0.104 2.15 3300 604d332f040hs2 22.23 x 79.38 0.115 0.077 2.60 1800 604d182f040jl2 25.04 x 53.98 0.175 0.117 2.05 3900 604d392f040js2 25.04 x 79.38 0.091 0.061 3.40 4700 604d472f040jt2 25.04 x 92.08 0.074 0.050 4.10 50 wv dc at + 85 c, surge = 75 v 470 604d471f050gj2 19.05 x 41.28 0.430 0.280 0.93 560 604d561f050gl2 19.05 x 53.98 0.325 0.212 1.15 680 604d681f050hj2 22.23 x 41.28 0.245 0.160 1.25 820 604d821f050hl2 22.23 x 53.98 0.185 0.120 1.60 1200 604d122f050hp2 22.23 x 66.68 0.130 0.085 2.15 1000 604d102f050jl2 25.04 x 53.98 0.150 0.098 2.10 1500 604d152f050jp2 25.04 x 66.68 0.108 0.070 2.80 2200 604d222f050js2 25.04 x 79.38 0.081 0.053 3.40 3300 604d332f050jt2 25.04 x 92.08 0.065 0.042 4.25 electrical data and ordering information capacitance (f) part number nominal case size d x l (mm) max. esr at 100 khz/25 c ( ? ) max. z at 100 khz/25 c ( ? ) max. ripple current at 100 khz/85 c (a)
604d www.vishay.com vishay sprague revision: 24-apr-13 5 document number: 42040 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 75 wv dc at + 85 c, surge = 100 v 220 604d221f075gj2 19.05 x 41.28 0.650 0.384 0.78 270 604d271f075gl2 19.05 x 53.98 0.500 0.295 1.00 390 604d391f075hj2 22.23 x 41.28 0.370 0.218 1.10 560 604d561f075hl2 22.23 x 53.98 0.290 0.171 1.40 820 604d821f075hp2 22.23 x 66.68 0.200 0.118 1.95 1000 604d102f075hs2 22.23 x 79.38 0.153 0.090 2.25 680 604d681f075jl2 25.04 x 53.98 0.230 0.136 1.85 1500 604d152f075js2 25.04 x 79.38 0.130 0.077 2.95 1800 604d182f075jt2 25.04 x 92.08 0.100 0.059 3.55 100 wv dc at + 85 c, surge = 125 v 150 604d151f100gj2 19.05 x 41.28 1.000 0.530 0.70 180 604d181f100gl2 19.05 x 53.98 0.765 0.405 0.90 270 604d271f100hj2 22.23 x 41.28 0.565 0.300 0.93 390 604d391f100hl2 22.23 x 53.98 0.435 0.230 1.20 560 604d561f100hp2 22.23 x 66.68 0.300 0.159 1.60 470 604d471f100jl2 25.04 x 53.98 0.340 0.180 1.55 820 604d821f100jp2 25.04 x 66.68 0.235 0.125 2.10 1000 604d102f100js2 25.04 x 79.38 0.185 0.098 2.65 1200 604d122f100jt2 25.04 x 92.08 0.150 0.080 3.15 200 wv dc at + 85 c, surge = 250 v 47 604d470f200gj2 19.05 x 41.28 2.600 0.780 0.60 82 604d820f200gj2 19.05 x 41.28 1.530 0.460 0.75 120 604d121f200hl2 22.23 x 53.98 1.300 0.390 0.95 180 604d181f200hp2 22.23 x 66.68 0.865 0.259 1.25 270 604d271f200ht2 22.23 x 92.08 0.520 0.156 1.90 220 604d221f200jp2 25.04 x 66.68 0.650 0.195 1.67 390 604d391f200jt2 25.04 x 92.08 0.405 0.122 2.50 electrical data and ordering information capacitance (f) part number nominal case size d x l (mm) max. esr at 100 khz/25 c ( ? ) max. z at 100 khz/25 c ( ? ) max. ripple current at 100 khz/85 c (a)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
